Midea MAW25R1YWT User Manual page 12

TIMER: AUTO START/STOP FEATURE:
• When the unit is on or off, first press
the Timer button. The TIMER ON
indicator light will illuminate indicating
the Auto Start program has initiated.
• When the time of TIMER ON is
displayed, press the Timer button
again. The TIMER OFF indicator light
illuminates. It indicates the Auto Stop
program has initiated.
• Press or hold the UP or DOWN button
to change the Auto time by 0.5 hour
increments, up to 10 hours, then at 1
hour increments up to 24 hours. The
control will count down the time
remaining until start.
• The selected time will register in
5 seconds, and the system will
automatically revert back to display
the previous temperature setting or
room temperature when the unit is
on. (when the unit is off, there is no
display.)
• Turning the unit ON or OFF at any
time or adjusting the timer setting to
0.0 will cancel the Auto Start/Stop
timed program.
• If setting ON 0.5 and OFF 1 at the
same time, the unit will be activated
in 0.5 hour, operates for 0.5 hour and
then stops.
 Page 12 
Displays:
Displays
Shows the set temperature in "°C" or
"°F" and the Auto-timer settings. While
on Fan Only mode, it shows the room
temperature.
Error codes:
AS - Room temperature sensor error -
Unplug the unit and plug it back in.
If error repeats, call for service.
NOTE: In Fan Only mode, it will
display "LO" or "HI."
ES - Evaporator temperature sensor error
- Unplug the unit and plug it back in. If
error repeats, call for service.
HS - Electric heating sensor error - Unplug
the unit and plug it back in. If error
repeats, call for service.
NOTE
If the unit shuts off unexpectedly due
to the power outage, it will restart
with the previous function setting
automatically when the power resumes.