Midea MAW25R1YWT User Manual page 11

Connect Indicator Light
(Wi-Fi models only)
Timer Sleep
Button Button
FILTER FEATURE:
Press Filter button to initiate this feature.
This feature is a reminder to clean the Air
Filter for more efficient operation. The light
will illuminate after 250 hours of operation.
To reset after cleaning the filter, press the
Filter button and the light will go off.
ECO FEATURE:
Press ECO button to initiate this
function. This function is available on
COOL, DRY, AUTO (only AUTO-COOLING
and AUTO-FAN) modes. The fan will
continue to run for 3 minutes after the
compressor shuts off. The fan then cycles
on for 2 minutes at 10 minute intervals until
the room temperature is above the set
temperature, at which time the compressor
turns back on and Cooling resumes.
TO SELECT THE OPERATING MODE:
To choose operating mode, press
Mode button. Each time you press the
button, a mode is selected in a sequence
that goes from Auto, Cool, Dry and
Fan. The indicator light adjacent will be
illuminated and remain on once the mode
is selected.
The unit will automatically initiate the Energy
Saver function under Cool, Dry, Auto (only
Auto-Cooling and Auto-Fan) modes.
LED
Display
Up ( ) and Down (
Mode
Button Buttons
) Fan
Button
To operate on Auto feature:
• When you set the air conditioner to
AUTO mode, it will automatically select
cooling or fan only operation depending
on what temperature you have selected
and the current room temperature.
• The air conditioner will control room
temperature automatically according
to temperature you've set.
• In this mode, the fan speed cannot be
adjustedas it's automatically controlled
according to temperature setting and
room temperature.
To operate on Fan Only:
• Use this function only when cooling
is not desired, such as for room air
circulation or to exhaust stale air (on
some models). (Remember to open
the vent during this function, but keep
it closed during cooling for maximum
cooling efficiency.) You can choose
any fan speed you prefer.
• During this function, the display will show
the actual room temperature, not the set
temperature as in the cooling mode.
• In Fan Only mode, the temperature is
not adjusted.
To operate on Dry mode:
In this mode, the air conditioner will
generally function as a dehumidifier. Since
the conditioned space is a closed or sealed
area, some degree of cooling will occur.
Power
Button
Energy Clean
Saver Filter
 Page 11 