Midea MAW25R1YWT User Manual page 10

Air Conditioner Features and Controls
ELECTRONIC CONTROL OPERATING INSTRUCTIONS
Before you begin, thoroughly familiarize yourself with the control panel as shown below
and all its functions, then follow the symbol for the functions you desire. The unit can be
controlled by the unit control alone or with the remote controller.
Connect Indicator Light
(Wi-Fi models only)
Timer Sleep
Button Button
TO TURN UNIT ON OR OFF:
Press ON/OFF button to turn unit on
or off.
NOTE
The unit will automatically initiate the
Energy Saver function under Cool,
Dry, Auto (only Auto-Cooling and
Auto-Fan) modes.
TO CHANGE TEMPERATURE SETTING:
Press UP (
)/DOWN (
change temperature setting.
NOTE
Press or hold either UP (
button until the desired temperature is
seen on the display.
This temperature will be automatically
maintained anywhere between 62°F
(17°C) and 86°F (30°C). If you want to
display the actual room temperature,
see To Operate on Fan Only section.
 Page 10 
LED
Display
Mode Up ( ) and Down (
Button Buttons
) button to
)/DOWN ( )
) Fan
Button
TO ADJUST FAN SPEEDS:
Press to select the Fan Speed in four
steps-Auto, Low, Med or High. Each time
the button is pressed, the fan speed mode
is changed. On Dry mode, the fan operates
on Low speed automatically.
SLEEP FEATURE:
Press Sleep button to initiate the
sleep mode. In this mode the selected
temperature will increase by 2°F/1
(or 2)°C 30 minutes after the mode
is selected. The temperature will then
increase by another 2°F/1 (or 2)°C after
an additional 30 minutes. This new
temperature will be maintained for 6
hours before it returns to the originally
selected temperature. This ends the
Sleep mode and the unit will continue to
operate as originally programmed. The
Sleep mode program can be cancelled
at any time during operation by pressing
the Sleep button again.
Power
Button
Energy Clean
Saver Filter