The Lower Toolbar; Stepped Controls; Bypass - Arturia EQ SITRAL-295 User Manual

5.2. The Lower Toolbar

When you hover the mouse over a parameter control, you will see a readout showing that
parameter's name and a brief description in the left part of the lower toolbar.
Also, you will notice that a small popup window appears next to the parameter control,
displaying its current value. This will also show the value changes when you move the
control (edit the parameter). This is handy, because you don't need to touch the parameter
control to read the current value, and you may also keep looking at the parameter while you
read the value changes.
On the right side of the lower toolbar are several small windows and buttons. These are very
important features, so let's take a closer look.

5.2.1. Stepped Controls

When 'Stepped Controls' is ON (default), you can only select the frequency and the gain
found in the original unit: stepped controls.
When 'Stepped Controls' is OFF, you're not stuck to the values offered by the original unit
and can choose any value in between: continuous controls.

5.2.2. Bypass

This one is obvious. Activating the bypass option will completely disable the EQ SITRAL-295
plug-in.
This action may also be performed via the Power switch, but bypassing the plugin that way
does not bypass the analyzer, which will remain active.
When the plug-in is completely bypassed, the GUI is grayed out and shows the word
"Bypassed".
Arturia - User Manual EQ SITRAL-295 - USER INTERFACE 26