! When you edit settings in a Preset and close your DAW project without saving the Preset, the
changes will be remembered when you reopen it – but they will be recalled in Slot A. That means that
editing settings in Slot B and closing your DAW without saving them will move those settings over to
Slot A when you reopen the project — and Slot B will be blank. Save often!
5.1.4. Advanced Button
Near the upper right corner of the top toolbar is the Advanced Button. This opens up a panel
of extended controls, which we cover in detail in the
5.2. Lower Toolbar
The Lower Toolbar of the Rotary CLS-222 interface can be thought of in terms of left and
right halves. On the left is the Control Description display, and on the right are buttons for
several useful utility functions.
5.2.1. Parameter Descriptions
Operate or hover on any knob, button, icon, or other control, and a brief description of what
it does appear in the lower left-hand corner.
Arturia - User Manual Rotary CLS-222 - The Toolbars
Lower toolbar, left side
This Control Description pops up when you mouse over
the Rotor Balance knob in the Main Panel
Advanced Panel [p.16]
chapter.
32