Table of Contents
Advertisement
4. EQ SITRAL-295 CONTROL PANEL
The EQ SITRAL-295 plug-in can be used in Mono or Stereo configurations.
The Mono configuration is automatically loaded when you use the plug-in with mono tracks.
When inserted in stereo tracks, the Stereo configuration is automatically loaded as well.
By default, the plug-in works according to the source material.
♪: Not all DAWs work with mono tracks, in which case you will not be able to use the mono
configuration.
4.1. Channel Configuration (Mono/Stereo)
In stereo mode, the plug-in loads in full, with two processing modules, one for each channel.
When instantiated in stereo channels, the plug-in loads in stereo mode.
When instantiated in mono channels, the plug-in loads just one processing module. Also,
the M/S switch and Link switches are absent, as they would not have any role to play in
this mode. What's more, the Auto Gain switch changes place and appears under the Output
control.
EQ SITRAL-295 Mono configuration with Visualizer opened. Notice the Auto Gain switch
Arturia - User Manual EQ SITRAL-295 - EQ SITRAL-295 CONTROL PANEL
under the Output control knob.
14
Advertisement
Table of Contents
