Arturia EQ SITRAL-295 User Manual page 26

4.2.3.7. Low-Pass (High-Cut) Filter Frequency
This knob controls the high-cut frequency (low-pass filter) of the SITRAL-295. The high-cut
filter cuts the higher frequencies, preventing unwanted high frequencies from influencing
the audio.
High frequencies may reflect in the overall audio volume (sometimes even without being
very well perceived) by causing listening fatigue, or simply causing the audio to sound harsh
and strident. Filtering the higher frequencies can contribute to a softer and more pleasant
audio output, without compromising the final result.
The filter is Off by default, but can be activated by simply turning the knob. It starts at 1.4
kHz and goes up to 22 Hz. The knob is continuous, but can also be stepped just like the other
controls by pressing the Stepped Controls" button in the Lower Toolbar.
4.2.3.8. Output
This knob controls the overall output volume of the EQ SITRAL-295 plug-in. It can attenuate
the output down to -15 dB and boost it up to 15 dB. By default its positioned at 0 dB.
21
SITRAL_295 High Cut Filter controls and
Output Controls in a stereo environment.
Notice the L and R light indicators,
meaning that it is in Stereo mode, as
opposed to M/S mode
Arturia - User Manual EQ SITRAL-295 - EQ SITRAL-295 CONTROL PANEL