Barco Nio Fusion12MP User Manual page 17

Overview
The panel, standard attached to a stand, is compatible with the VESA 100 mm standard. Thus, it can be used
with a mount that is compliant to the VESA 100 mm standard. This chapter shows you how to release the
panel from the stand and how to attach it to a VESA mount. If you're not using a mount, you can skip this
chapter.
1. Unlock the stand locking mechanism and put the display in the highest position.
Image 2–5
2. Put the display face down on a clean and soft horizontal surface. Be careful not to damage the panel
screen.
3. Push the VESA mount cover to the right and lift the cover on the right with your finger or a flathead
screwdriver.
Image 2–6
4. Push the VESA mount cover to the left and release the cover on the left with a flathead screwdriver.
Installation and setup
R5913350 /02 Nio Fusion 12MP 17