High-Mount Stop Light; Emergency Light; The Front Fog Light - BYD L3 QCJ7153 A Owner's Manual

Table of Contents

Advertisement

Illumination intensity sensor is located
on the top of the instrument panel on the
driver side.
Do not place and objects on the above
stated area of the instrument panel or
paste any objects on the above stated
area of shield glass to obstruct the
sensor.
NOTICE
In order to prevent unnecessary
discharge of the storage battery, do
not turn on light while the engine is
not running.
Lighting, Wipers, Defrosters 1-68
L3 Owner's Manual

High-Mount Stop Light

When pressing the braking pedal, the
light and rear stop light will be turned on
at the same time. It indicates that the car
is in braking status to prevent accident.

Emergency Light

To turn on an emergency light, please
press the button.
All direction the indication lamps blink.
To turn them off, just press the button
again.
When you have to park your car where it
is likely to cause traffic accident, please
turn on the emergency light to warn
other the drivers.
Please park the car far away from the
road.
When the emergency light is turned on,
the turn signal light does not work.
NOTICE
In order to prevent unnecessary
discharge of the storage battery, do
not turn on light while the engine is
not running.
The Front Fog Light (if installed)

Advertisement

Table of Contents
loading

Table of Contents