Starting The Engine - BYD L3 QCJ7153 A Owner's Manual

2. To remove the fuel tank cap, rotate
the cap counterclockwise slowly and
take it out after a while. After removing
the cap, please hang it on cap
supporter.
When the fuel tank cap is taken out, a
slight noise can be heard. It's normal.
When mounting the cap, rotate the
cover clockwise until a click is heard.
FRIENDLY TIPS
● In order to prevent fuel spilling in
an unexpected accident, please
make sure to tighten the fuel tank
cap.
● When replacing the fuel tank cap,
please use an original The fuel tank
cap of BYD L3 car. It can adjust the
pressure of the fuel tank.

Starting the Engine

Before Starting the Engine
1. Please check surrounding of the car
before getting into the car.
Keys and Doors 1-28
L3 Owner's Manual
2. Adjust seat position, seat back
angle, seat cushion height, head
protection device
steering wheel angle and height.
3. Adjust internal and
rearview mirror.
4. Lock all car doors.
5. Fasten seat belt.
Engine Starting Methods
(a) Before Starting
1. Perform parking brake to the full.
2. Turn off all unnecessary car light
and accessories.
3. Automatic transmission: Place the
shift at position P or N.
Manual transmission: place the shift
at neutral position.
4. Press the braking pedal or the
clutch pedal to the full until the car
moves.
● Starting procedure should not
height and
exceed 20 seconds to avoid
overheating
wiring system.
external
● Do not operate the engine
refrigerator in a high speed.
● If it is hard to start the engine or
the
frequently, please check the
engine immediately.
(b) Starting the Engine
Starting function of button
When the smart key is inside the car,
press "start/stop" switch to start the
engine.
Before starting the engine, be sure to
follow the description in "(a) Before
starting".
Normal starting procedure
Only when the smart key is inside the
car (held by someone) can engine be
started.
NOTICE
of starter and
engine shuts down