Lighting, Wipers, Defrosters; Head Light And The Turn Signal Light - BYD L3 QCJ7153 A Owner's Manual

Head Light and the Turn Signal
Light
(Without automatic light control)
Head light
Turn on the following lamps: rotate
lever button of head lamp/ the turn
signal light.
Position1—the front position lamp, rear
position lamp, LOGO assembly behind
LED, number plate lamp, combined
meter backlight and combined meter
position indicator lamp (green) are all in
ON status.

Lighting, Wipers, Defrosters 1-66

L3 Owner's Manual
Position 2—Headlight and all lamps
stated above.
Light reminding buzzer
If the clearance lamp switch is turned on
and power shift position is "OFF", when
opening the driver door, the alarm will
remind you to turn off the light.
NOTICE
In order to prevent unnecessary
discharge of the storage battery, do
not turn on light while the engine is
not running.
In order to prevent
consumption of the storage battery,
when the power shift is at OFF and
the combined switch is at clearance
lamp, the clearance lamp on car door
will remain on for 10 seconds before
turning off. After opening the car
door, the clearance lamp will remain
on for 10 minutes before turning off.
High beam
lights—Rotate light adjustment button
on the top of left combined switch to the
front lamp position. When using low
beam lights, please move the switch
excessive
handle to position 2. When using
distance light, Please turn switch handle
to position 1. At this time, distance light
and low beam lights are on. High beam
light indicator (blue) on the Combined
Meter remains in turn-on status.
High beam light blinks—Move the left
combined switch handle to position 3 to
turn on the distance light. Release the
left combined switch handle to turn off
the distance light.
and low beam