The Engine Shut Down While Driving - BYD L3 QCJ7153 A Owner's Manual

4.2. Connect the positive (red) bridging
cable clip to the positive connector (+) of
the storage battery to be charged.
4.3. Connect the negative
bridging cable clip to the negative
connector (-) of discharged the storage
battery.
4.4. Connect the clip on the other end of
the negative (black) jump cable to the
unpainted fixed metal point of the car
with discharged the storage battery.
The connection point is shown in the
following figure.
Emergency Handling 4-4
L3 Owner's Manual
Connection to jump-start the engine.
While you jump-start an engine, do not
keep the connection cable near any
(black)
operating part of the engine.
FRIENDLY TIPS
While conducting connection, do not
keep your body near the storage
battery or carelessly contact the jump
cable or clip with any object other
than correct the storage battery
connector or point in order to avoid
severe injury.
5. Start the engine in a normal way. After
starting the engine, please press the
accelerating pedal gently and keep the
engine running at 2000 rpm for a few
minutes.
6. In a totally opposite procedure,
carefully remove the cable: Firstly
remove negative cable and then remove
positive cable.
7. Take off the cloth covered on the
storage battery. The cloth might be
stained with sulfuric acid.
8. If you want to move, please recover
all the storage battery orifices.
If the reason of the storage battery
discharging is not clear (for example, the
lamp remains on), please contact BYD
authorized service
examination.

The Engine Shut Down While Driving

The engine shut down while driving.
1. Please reduce car speed gradually
and keep a straight line while driving.
Please pull your car off the road to a
safe place.
station for