Section 9 Other Devices - BYD L3 QCJ7153 A Owner's Manual

above is limited, please reverse the car
slowly while looking out
surrounding.
FRIENDLY TIPS
●
The parking auxiliary system is
used to help the driver park and
shall not substitute
personal judgment.
operate your car while looking
out for the surrounding.
●
Do not place any fixture or other
articles within the sensor range.
Otherwise, it might affect normal
work of the system.
●
In some cases, the system does
not work normally and cannot
detect some objects which the
car is approaching. Therefore,
please look out
surrounding of the car instead of
relying on the system only.
Sensor Detection Information
Car conditions and
conditions might affect
performance to detect an obstacle
accurately.
Other Devices 1-116
Specific possible cases are exemplified
for the as below:
●
There is dirt, water or fog on the
sensor;
●
There is snow on the sensor or the
sensor is frozen;
your
Please
●
The sensor is covered in any way;
●
The car is obviously skew or is
overloaded;
●
The car travels on very bumpy road,
slope, gravel road or grassland;
●
The sensor is sprayed again;
●
There is noise which generates
for the
ultrasonic wave, such as car honk,
motorcycle the engine sound, air
brake sound of heavy-duty the
vehicle or it is very noisy near the car;
●
There is another car equipped with
surrounding
parking auxiliary system nearby;
sensor
●
The car is equipped with a tow lug;
L3 Owner's Manual
●
The bumper or
experiences strong impact;
●
The car is approaching a high or
curved curb;
●
The car is under
sunshine or in a very cold day;
●
A non-OEM suspension is installed
which is lower than OEM suspension.
Except the cases stated above, the
sensor might not determine the actual
distance from some objects which has a
special shape;
Shape and material of an obstacle might
affect sensor detection. Please notes
the following obstacles;
●
Electric wire, rail guard, rope;
●
Cotton, snow or other materials
which absorb radio wave;
●
Objects with a sharp angle;
●
A low obstacle;
the sensor
scorching