Operating Essentials - BYD L3 QCJ7153 A Owner's Manual

5. Turn the knob to and air flow will
come to windshield glass and side
window.
Air supply mode is of external circulation
mode.
Press "A/C" button to turn on air
conditioner to clean windshield glass
and side window quickly.
Air Conditioning System 1-104
L3 Owner's Manual
Air Supply Mode Selection Button
1. Internal cycle—Recycle air in the
car.
2. External cycle—Introduce external
air into the system.
When pressing internal/external cycle
button, the indicator (green) is turned on
and air supply mode is internal cycle;
Press it again, the indicator is turned off
and air supply mode is external cycle.
"A/C" button
To turn on air conditioner system
requires that firstly turn the fan rotation
speed control knob to non-"0",Then
press "A/C" button. At this time, indicator
on the button (green) is turned on. Press
"A/C" button again or rotate fan rotation
speed control knob to 0, the indicator is
turned off and air conditioner system is
turned off.
Operation Essentials
●
In order to cool a car parked under
hot sunshine, please lower car door
glass and drive for a few minutes.
Lift the glass after hot air is
discharged. In this way, hot air can
be discharged. Air conditioner will
cool the car soon.
●
Make sure that air inlet grid in the
front of the windshield glass is not
blocked (for example, by leaves or
snow).
●
In a damp day, do not blow cold air
onto windshield glass. Due to
temperature difference inside and
outside windshield
windshield glass might get foggy.
●
Please keep downside of the front
seat ventilated to fully cycle air in
the car.
●
In a cold day, please keep rotation
speed of the air blower at high
rotation speed for one minute to
clear snow or dampness in air inlet.
In this way, car window fog will be
reduced.
●
When driving the car following other
the vehicles on a dusty road or
glass,