Power-Driven External Rearview Mirror - BYD L3 QCJ7153 A Owner's Manual

Power-Driven External
Mirror
The driver can use mirror direction
conversion button on the power-driven
external rearview mirror to adjust the
powered-driven external rearview mirror
to a position where you can see the car
side.
Foot lamp of external rearview mirror (if
installed)
1. When the car turns from anti-theft
condition to non-anti-theft condition, the
foot lamp of external rearview lamp will
remain on for 15 seconds; When the car
turns from non-anti-theft condition to
L3 Owner's Manual
Rearview
anti-theft condition, the foot lamp will
turn off.
2. In the anti-theft condition, when the
key enters detection scope, the foot
lamp will remain on for 15 seconds; In
the anti-theft condition, when the key
does not enter detection scope, the
lamp will remain off.
Folding of external rearview mirror (if
installed)
When the car goes through a narrow
space, the driver might operate the
folding button on power-driven external
rearview mirror switch to fold the
external rearview mirror in order to pass
the space successfully. Press the folding
switch again after passing the space to
resume the rearview mirror to normal
condition.
Do not adjust rearview mirror while
the car is travelling. Otherwise, the
driver might
incorrectly and cause an accident.
Seats, Seat Belts, Steering Wheels, the Child Seat and Rearview Mirrors 1-59
FRIENDLY TIPS
operate the car
Power-driven external
mirror controller
Use the switch to adjust external
rearview mirror.
1. Selection switch — to select the
external rearview mirror to be adjusted.
Press the switch to L (left) or R (right).
2. Control switch — to adjust the
external rearview mirror
Press the switch in the desired direction.
3. Folding button (if installed) — Press
the button to fold the external rearview
mirror. Press it again to unfold the
external rearview mirror.
rearview