5 Interfaces
5.9 Camera Link
The VisionBox AGE-X5 with Camera Link has two Mini Camera Link connectors.
The Camera Link interface supports the following features:
Camera Link Dual-Base configuration:
o 2x Base / 1x Medium Camera Input
o 2x Serial communication interface
Camera Link Full / Deca configuration:
o 1x Base / 1x Medium / 1x Full / 1x Deca Camera Input
o 1x Serial communication interface
Camera Control signals (CC) can be controlled by software or by the RTCC.
Providing power to the camera using Power-over-Camera-Link.
A different FPGA firmware is used to select between Dual-Base and Full configuration.
Strassheimer Str. 45; 61169 Friedberg - Germany; Tel. +49 6031-6842611; Fax +49 6031-6842612
Figure 24: Mini Camera Link connectors
IMAGO Technologies GmbH
info@imago-technologies.com; www.imago-technologies.com
Page 32 / 36