Led Controller And Camera Trigger; Led Controller - IMAGO VisionBox AGE-X5 Hardware Manual

5 Interfaces

5.8 LED Controller and Camera Trigger

The VisionBox provides two LED Controller channels and two Camera Trigger channels. Each con-
nector shares one LED Controller and one Camera Trigger channel.
Figure 21: LED / Camera Trigger connector
Phoenix contact plug component: MC 1,5/4-STF-3,5 (order no. 1847071)

5.8.1 LED Controller

The LED Flash Controller is designed as a current source. Output current, flash duration and other
parameters can be set via software.
The following diagram shows the internal structure for the LED Controller:
VisionBox
+24V
Power
GND
Supply
CPU
Strassheimer Str. 45; 61169 Friedberg - Germany; Tel. +49 6031-6842611; Fax +49 6031-6842612
Strobe
enable
Real Time
Current
Communication
reference
Controller
(FPGA) Current
value
Figure 22: LED Controller structure
IMAGO Technologies GmbH
info@imago-technologies.com; www.imago-technologies.com
Name
LED+ Positive output /
current source
LED- Negative output /
current sink
GND Ground reference
TRG Trigger output
Table 16: Pin assignment LED / Camera Trigger
Output Channel
Filter
Current
Regulation
R
Sense
Page 30 / 36
Function
ACQ LED +
LED
Lighting
Unit
ACQ LED -