Power-Over-Camera-Link Led - IMAGO VisionBox AGE-X5 Hardware Manual

4 Power Connector and LEDs

4.4 Power-over-Camera-Link LED

The VisionBox AGE-X5 with Camera Link provides two CL connectors. If a PoCL-capable camera
and Camera Link cable are used, the powered supply can be provided by the VisionBox through
the same cable. PoCL is supported independently for both connectors. An LED is assigned to each
Camera Link connector to indicate the PoCL state:
Red
Green blinking Non-PoCL camera detected
Green
Strassheimer Str. 45; 61169 Friedberg - Germany; Tel. +49 6031-6842611; Fax +49 6031-6842612
Figure 8: PoCL status LEDs
LED
Connection sensing
PoCL camera detected and power supply active
Table 7: PoCL LED signaling
IMAGO Technologies GmbH
info@imago-technologies.com; www.imago-technologies.com
PoCL State
Page 20 / 36