Displayport Monitor Interface; Cfast - IMAGO VisionBox AGE-X5 Hardware Manual

Hide thumbs Also See for VisionBox AGE-X5:
Table of Contents

Advertisement

5 Interfaces

5.4 DisplayPort Monitor Interface

Figure 14: DP connector

5.5 CFast

The slot supports cards up to the CFast 2.0 specification with interface speeds of 6 GB/s, 3 GB/s
and 1.5 GB/s. The BIOS can boot from this device, but a card hot swap is not supported. The card
edge is behind a service flap which can be removed tool-free.
Strassheimer Str. 45; 61169 Friedberg - Germany; Tel. +49 6031-6842611; Fax +49 6031-6842612
The DisplayPort interface supports version 1.2 with a data
rate of 17.28 Gbit/s. The maximum supported resolution is
3840 × 2160 pixels. To connect the DP Port with a DVI or VGA
monitor, an active adapter is required.
Figure 15: CFast with dust protection flap
IMAGO Technologies GmbH
info@imago-technologies.com; www.imago-technologies.com
Page 25 / 36

Advertisement

Table of Contents
loading

This manual is also suitable for:

Visionbox age-x5 4x 1gigeVisionbox age-x5 2x 5gigeVisionbox age-x5 2x 1gige

Table of Contents