Rs-422 Interface - IMAGO VisionBox AGE-X5 Hardware Manual

5 Interfaces

5.7 RS-422 Interface

The RS-422 interface can be used to connect additional devices like encoders, sensors and camer-
as. The behavior is controlled by the Real-Time Communication Controller.
D-Sub 15-HD Connector:
For example, the AMPHENOL connector L77HDE15SOL2 can be used to make a connection to the
VisionBox.
The optional RS-422 connector is available for all configurations and it provides four input signals:
Pins #5 and #15 provide a 5 V / 12 V power supply for RS-422 encoders. They are protected inter-
nally by a 2 A fuse.
The Camera Link version always provides a RS-422 connector with three input and three output
signals:
Strassheimer Str. 45; 61169 Friedberg - Germany; Tel. +49 6031-6842611; Fax +49 6031-6842612
15
10
5
Figure 20: Encoder connector (D-Sub 15-HD)
Pin Function
1 In1-
2 In2-
3 In3-
4 N/C
5 +5 V
6 GND
7 In1+
8 In2+
Table 14: RS-422 pin assignment for GigE versions
Pin Function
1 In1-
2 In2-
3 Out2-
4 Out1-
5 +5 V
6 GND
7 In1+
8 In2+
Table 15: RS-422 pin assignment for Camera Link version
IMAGO Technologies GmbH
info@imago-technologies.com; www.imago-technologies.com
11
6
1
Pin Function
9 In3+
10 N/C
11 In0+
12 In0-
13 N/C
14 N/C
15 +12 V
Pin Function
9 Out2+
10 Out1+
11 In0+
12 In0-
13 Out0+
14 Out0-
15 +12 V
Page 29 / 36