Related Manuals for Racing RAC2040ECS-UK
Summary of Contents for Racing RAC2040ECS-UK
- Page 1 ORIGINAL INSTRUCTIONS ELECTRIAL CHAINSAW RAC2040ECS-UK INSTRUCTIONS MANUAL Read the instructions before using the tool RACING 32, rue Aristide Bergès - ZI 31270 Cugnaux – France MADE IN PRC 2018...
-
Page 2: Table Of Contents
CONTENTS SAFETY WARNINGS YOUR PRODUCT ASSEMBLY OPERATION MAINTENANCE AND STORAGE DISPOSAL DECLARATION OF CONFORMITY... -
Page 3: Safety Warnings
1. SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. ave all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. - Page 4 Chain saw safety warnings: Keep all parts of the body away from the saw chain when the chain saw is operating. Before you start the chain saw, make sure the saw chain is not contacting anything. A moment of inattention while operating chain saws may cause entanglement of your clothing or body with the saw chain.
- Page 5 • People under the age of 18 must not use this product • Keep in mind that the operator or user is responsible for accidents or risks to other persons or their property. • Do not use the tool if you are drunk, tired, under the influence of drugs or ill. Do not use the tool if you are not in an adequate physical condition.
- Page 6 • When not in use, store the product out of the reach of children. • Children should not play with plastic bags, sheets and small parts! Keep them out of the reach of children. There is a danger of suffocation! •...
- Page 7 Symbols Warning symbol Do not use the tool when raining Read and refer to these operating instructions Pull the plug out from the socket immediately when the cable is damaged or entangled or split Wear hearing protection and eyes protection Class II product Value of sound emission according to Wear protective gloves.
- Page 8 Intended use The tool should only be used to cut trees. Do not use it for other applications. This product should not be used outside of domestic premises e.g. for cutting firewood in forested areas. The use of this product in case of rain or humid environment is prohibited. This product is intended for private domestic use only.
-
Page 9: Your Product
2. YOUR PRODUCT a. Description Rear handle Safety lock-off button Chain oil cap Front handle Guide bar with sprocket Chain Safety chain brake lever Main switch Chain cover 10. SDS system 11. Sprocket 12. Adjustable knob... - Page 10 Technical data: Model RAC2040ECS-UK 230V-240V˜ 50Hz Tension Power 2000W Max speed of 5500/min the spindle Cutting length 400mm Chain speed 10.2m/s Guide Bar 2181-713303(16”,0,050”) Chain 2484-713302 (16” 3/8” 57Teech Weight with bar and chain 3.3 kg Sound : 92.1 dB(A)
-
Page 11: Assembly
3. ASSEMBLY a. Assembly of the chain guide IMPORTANT: The machine must not be started during assembly. Wear protective gloves when handling the blade. Your chain saw is supplied one SDS system for assemble and adjust quickly for chain tension. The outside ring (part 1) adjusts the tension of the chain and the inner screw adjusts the tension of the bar. -
Page 12: Operation
4. OPERATION Before using the chainsaw, inspect the work area. This must be cleared. Remove any branches, obstacles and other items that may cause damage during cutting. The unit should always be filled with oil for blade lubrication. Check the level before the use and refill when necessary. 1. - Page 13 3. Main settings a. Release of the chain brake In the event of a kickback occurring, the left hand should come into contact with the chain brake stopping the chain immediately by moving it to position ‘0’. See fig 1. The operation of the chain brake must be checked prior to each use.
- Page 14 a. Felling of trees Examine the work area and estimate where the tree will fall. Start the machine as described above. Start by making a notch in the direction of fall chosen. When the tree falls, shout or make a beep to alert people in the vicinity. When the shaft falls, move away from the cutting area.
-
Page 15: Maintenance And Storage
5. MAINTENANCE AND STORAGE 1. Maintenance Before any maintenance work, the machine must be switched off and completely cooled. Perform the maintenance work according to the instructions below and perform them regularly. A clean, well- maintained machine increases its standard of living and efficiency. On the contrary, a machine maintained can cause damage, accidents and render the tool inoperable in the short term. -
Page 16: Disposal
d. chain saw Check each time the cutter and cutting angles are as shown below. e. Sharpening of the chain For best performance, we strongly recommend that you periodically sharpen the chain. The chain can either be sharpened by a professional or by yourself by providing you with a sharpening guide (make sure you know how to use it). -
Page 17: Declaration Of Conformity
Racing ZI, 32 rue Aristide Bergès – 31270 Cugnaux - France Declares that the machinery designated below: Chainsaw RAC2040ECS-UK Serial number: Complies with the provisions of the Directive "machinery" 2006/42/EC and regulations National transposing it; Also complies with the following European directives:...