Operation - Racing RAC2040ECS-UK Original Instructions Manual

4. OPERATION

Before using the chainsaw, inspect the work area. This must be cleared. Remove any branches, obstacles and other
items that may cause damage during cutting.
The unit should always be filled with oil for blade lubrication. Check the level before the use and refill when necessary.
1. Filling with lubrication oil
The tool always must be filled with lubrication oil (for the blade). Check the level oil the tank. When the oil arrives
at the minimum level, the tank shall be completely filled.
To add lubrication oil, open the tank by removing the cap. Put directly the oil in the tank. Close the tank with its
cap.
2. Starting and stopping
Note: Ensure the brake is working efficiently. Check its operation every time before commencing work
with it.
•
Connect the tool to a mains power supply.
•
Depress the safety lock off button (2) whist squeezing the main switch (8).
•
Release the main switch to stop the tool
Open and close
12