Board Configuration With Addireg; Addireg Installation; Fig. 6-6: Installation Of The Addireg Program - Addi-Data ADDIALOG PA 358 Technical Description

PA 358
6.4

Board configuration with ADDIREG

The ADDIREG registration program is a 32-bit program for Windows NT 4.0 und
Windows 9x. The user can register all hardware information necessary to operate the
ADDI-DATA PC boards.
IMPORTANT!
If you use one or several resources of the board, you cannot start the
ADDIREG program.
6.4.1

ADDIREG installation

IMPORTANT!
First installieren ADDIREG before installing and starting any other
application for the board.
- Change to the CD drive.
- Start the set-up program "setup.exe" (double click)
- Select one of the 3 parameters
Proceed as indicated on the screen and read attentively the "Software License" and
"Readme". In "custom", you can select your operating system.
The installation program gives you further instructions.
If the message "Der Keyboard Kernel wurde noch nicht gestartet, ... soll der Kernel
jetzt gestartet werden?" (Problem when installing the system) is displayed by starting
the program, deinstall the ADDIREG program and install it anew.
16

Fig. 6-6: Installation of the ADDIREG program

1- typical
2- compact
3- custom
Technical description Chapter 6