Installing The Software; Software Installation Under Ms-Dos And Windows 3.11; Software Installation Under Windows Nt/9X - Addi-Data ADDIALOG PA 358 Technical Description

Technical description
6.3

Installing the software

The board is delivered with a CD-ROM containing ADDIREG for Windows NT 4.0
and Windows 9x.
You can download the latest version of the ADDIREG program from the Internet:
http://www.addi-data.de
http://www.addi-data.com
The CD also contains standard software for the ADDI-DATA boards:
6.3.1

Software installation under MS-DOS and Windows 3.11

- Copy the contents of PA358\16bit on a disk. If several disks are to be used, the
directory contents is stored in several subdirectories (Disk1, Disk2, Disk3...).
- Insert the (first) disk into a drive and change to this drive.
- Enter <INSTALL>.
The installation program gives you further instructions.
6.3.2

Software installation under Windows NT/9x

- Select the directory PA358\winNT-9x\Driver\Disk1.
- Start the setup program "setup.exe" (double click)
- Select one of the 3 parameters
Proceed as indicated on the screen and read the "Software License" and "Readme".
Under "custom", you can select your operating system. The installation program
gives you further instructions.
Chapter 6
- 16-bit for MS-DOS and Windows 3.11
- 32-bit for Windows NT/9x.
1- typical
2- compact
3- custom
PA 358
15