Instrument Markings - HP ESG Series User Manual

HP ESG and HP ESG-D Series Signal Generators

Instrument Markings

The following markings and caution and warning labels are used on the instrument. Be
sure to observe all cautions and warnings.
No user serviceable parts inside. Refer servicing to qualified
WARNING
personnel.
ISM 1-A
User's Guide
The instruction manual symbol. The product is
marked with this symbol when it is necessary for the
user to refer to the instructions in the manual.
The CE mark is a registered trademark of the
European Community (if accompanied by a year, it is
the year when the design was proven).
The CSA mark is the Canadian Standards Association
safety mark.
This symbol is used to mark the on position of the
power line switch.
This symbol is used to mark the standby position of
the power line switch.
This symbol indicates that the input power required is
AC.
This is a symbol of an Industrial Scientific and
Medical Group 1 Class A product. (CISPER 11, Clause
4)
Safety and Regulatory
Instrument Markings
8-3