Signal Generator Accessories - HP ESG Series User Manual

Options and Accessories

Signal Generator Accessories

Signal Generator Accessories
This section describes the accessories for the signal generator that can be ordered at any
time.
Accessory Description
Transit Case The transit case is a sturdy carrying container designed to protect your
signal generator from physical damage during transportation. The interior
of the container is lined with compressible foam that is form-fitting to the
exterior shape of the signal generator. To order the transit case, request
HP part number 9211-1296.
Remote
Interface The remote interface consists of a keypad which is connected by a 1 meter
cable to the signal generator's AUXILIARY INTERFACE rear panel
connector (RS-232). This keypad lets you recall instrument states. (This is
the same recall function provided by the front panel keys.) The remote
interface is a convenient accessory for use in production environments
where multiple instrument states are used repetitively. To order the
remote interface, request HP part number HP 83300A.
RS-232
Cable Kit This kit contains the appropriate hardware (cable, adapters, and null
modem) to connect the signal generator RS-232 interface to a computer
controller. This hardware is required for downloading firmware from the
HP SoCo Web site. To order the RS-232 cable kit, request HP part number
E4400-60049.
6-6
HP ESG and HP ESG-D Series Signal Generators
User's Guide