Table of Contents
Advertisement
HP ESG and HP ESG-D Series Signal Generators
Enabling Options
The HP ESG and ESG-D Series Signal Generators are a highly flexible platform of
instruments that you can retrofit after purchase to add many new capabilities. Some new
optional features are implemented in hardware that you must install. Some options are
implemented in software but require the presence of optional hardware in the instrument.
This example shows you how to enable both hardware and software options.
Enabling a Hardware Option
1. When you purchase a new hardware option for your signal generator, the hardware and
instructions for installing the hardware will be included in a kit that you receive. Follow
the installation instructions to retrofit your signal generator with the new hardware.
2. Next, on the signal generator press
the Hardware Options menu. An example of the signal generator display follows:
The display indicates which options are currently enabled for the signal generator. In
this case Option UN3 is enabled, as indicated by the X placed in the "Selected" column.
3. Highlight the new option that you have just installed. (Use the up/down arrow keys or
the front panel knob.)
4. Press the
Select Item
Two other selection keys are available in this menu to help you identify the proper
options to be enabled.
highlighted option.
column.
User's Guide
Utility
softkey. An X will be placed in the "Selected" column.
removes the X from the "Selected" column in the
Deselect Item
removes all occurrences of the X from the "Selected"
Deselect All Items
,
Instrument Adjustments
Using Functions
Enabling Options
,
to access
Hardware Options
2-13
Advertisement
Table of Contents
