Table of Contents
Advertisement
HP ESG and HP ESG-D Series Signal Generators
Settings conflict; Frame repeat changed to continuous.
Indicates that single is not a valid repeat setting for an external data
source.
Settings conflict; Current frame length does not have symbol
boundary. End of frame has been patched with extra bits to allow
an integer of symbols in a frame.
With Option UN8, in TDMA format you can select from many different
modulations with different bits per symbol. Because all TDMA formats
have fixed frame size, in some modulations end-of-frame and
end-of-symbol do not happen at the same time. This message indicates
that end-of-frame has been patched with extra bits to allow an integer
number of symbols per frame.
Settings conflict; PHS or TETRA scramble can not be on when the
currently selected modulation type has more than 2 bits per
symbol.
Option UN8 provides modulations with more than 2 bits/symbol. For these
modulations, PHS and TETRA scramble are disabled.
Settings conflict; Current file length does not have an integer
number of symbols. User file size must have symbol boundary in
order to transmit the file.
A user-defined file must end with a symbol. If it does not, transmission is
aborted.
Settings conflict; User FSK file has deviations which are
incompatible with the current symbol rate. The modulation type
has been defaulted.
A frequency in the selected user FSK file exceeds the maximum possible
deviation for the current symbol rate. The default modulation type for the
mode has been selected to resolve the conflict.
Settings conflict; The symbol rate is too high for a > 16 symbol
filter. Baseband cannot function.
The filter is in a state that is inappropriate for the hardware. Although no
damage to the hardware will occur, the output is in an unknown state.
Report this error to the nearest Hewlett-Packard sales and service office.
User's Guide
Troubleshooting
-299 to -200: Execution Errors
3-39
Advertisement
Table of Contents
