Table of Contents
Advertisement
Troubleshooting
-299 to -200: Execution Errors
Data out of range; Synthesizer: Frequency out of bounds.
Indicates that the instrument received an internal request for a frequency
outside of its supported frequency range. Report this error to the nearest
Hewlett-Packard sales and service office.
Data out of range; Manual point exceeds list sizes. Limiting to
maximum point.
Indicates that the sweep/list manual point has been reassigned to a
smaller number value due to the longest list decreasing in size or being
turned off. Its new value is the length of the longest enabled list (frequency
or power).
Data out of range; Manual point exceeds frequency list size.
Limiting to maximum point.
Indicates that the sweep/list manual point has been reassigned to a
smaller number value due to the longest list decreasing in size or being
turned off. Its new value is the length of the frequency list which is the
longest enabled list.
Data out of range; Manual point exceeds power list size.
Limiting to maximum point.
Indicates that the sweep/list manual point has been reassigned to a
smaller number value due to the longest list shrinking, or being turned off.
Its new value is the length of the power list, which is the longest enabled
list.
Data out of range; The specified filter has too many symbols.
The baseband cannot function.
The filter is in a state that is inappropriate for the hardware. Although no
damage to the hardware will occur, the output is in an unknown state.
Report this error to the nearest Hewlett-Packard sales and service office.
Data out of range
Indicates that a legal program data element was parsed but could not be
executed because the interpreted value was outside the legal range defined
by the device (see IEEE 488.2 11.5.1.1.5).
3-32
HP ESG and HP ESG-D Series Signal Generators
User's Guide
Advertisement
Table of Contents
