Sound; Operation - Sony DVX-100 Operating Instructions Manual

Sound

There is no sound.
, Check that this unit is connected securely.
, The audio connecting cord is damaged. Replace it
with a new one.
, Make sure the master unit is turned on.
, Pause or Slow-playback function is activated.
Press N to return to normal playback.
, Fast-forward or fast-reverse function is activated.
Press N to return to normal playback.
Sound is noisy.
, Clean the disc.
, Select the correct digital output setting (page 40).
The sound loses its stereo effect when you
play a Video CD or an Audio CD.
, Change the audio output to "Stereo" (page 32).
, Make sure this unit is connected correctly (Refer to
the installation manual supplied with this unit).

Operation

The remote commander does not function.
, Remove any obstacles between the remote
commander and this unit.
, Use the remote commander closer to the remote
control sensor.
, Point the light emitters of the commander at the
receptor of the remote control sensor.
, Replace all of the batteries in the remote with new
ones if they are weak.
The disc does not play.
, There is no disc inside.
Insert a disc.
, Insert the disc correctly with the playback side
facing up in the disc tray.
, Clean the disc.
, An incompatible disc is inserted. See "This Unit
Can Play the Following Discs" (page 5).
, Check the region code of the DVD (page 5).
, Moisture has condensed inside this unit. Remove
the disc magazine (page 14) and leave this unit
turned on for about half an hour.
This unit does not play from the beginning
when playing a disc.
, Programme Playback (page 23), Shuffle Playback
(page 22), Repeat Playback (page 19) or A-B Repeat
Playback (page 20) has been selected. Deactivate
such functions above.
, Resume Playback has been selected.
Press x on the remote commander before you start
playing. (page 17)
, When you play a DVD, a title menu or a DVD
menu automatically appears on the monitor.
, When you play a Video CD, the PBC menu display
automatically appears on the monitor.
Playback stops automatically.
, The disc may contain an auto pause signal. While
playing such a disc, the DVD changer stops
playback at the signal.
You cannot perform some functions such as
Stop, Search, Slow-motion Playback, Repeat
Playback, Shuffle Playback or Programme
Playback.
, With some discs, you cannot activate these
functions.
continue to next page t
49