Using The Sound Control Functions - Sony MDP-650 Operating Instructions Manual

Using the sound
control functions
ANALOG
/Cll
AUDIO
MONITOR
an en
bi
ve NG
~ "D
Ss Ca
=> o
Notes
¢ The output level may differ
between digital and analog
sound.
¢ When using the DIGITAL
OUT (OPTICAL) connector,
you cannot alternate sound
output (always 1/L 2/R).
14 -EN | Basic Operations
Playing a stereo disc or Second Audio Program (SAP)
disc
When playing SAP discs such as bilingual discs, you can alternate the
sound output using the AUDIO MONITOR button.
To alternate the sound output
Press AUDIO MONITOR while playing the disc.
Each time you press AUDIO MONITOR, the on-screen indication
changes as follows:
[re 1/L—»> 2/R—+ 1/L 2/R 7
The indication appears on the screen briefly, then disappears.
Indication From stereo disc From SAP disc
1/L Left channel Sound track 1 (Left channel)
2/R Right channel Sound track 2 (Right channel)
1/L 2/R Stereo Sound track 1 (Left channel)
(Both channels) Sound track 2 (Right channel)
When you select 1/L (or 2/R), the sound of the left (or right) channel is
output from both speakers.
Listening to analog sound on an LD
If your LD contains digital soundtracks, the player automatically
outputs digital sound. To listen to sound recorded on analog
soundtracks, use the ANALOG/CS button.
Press ANALOG/OMl while playing the disc.
"> ANALOG" appears on the screen briefly and analog sound is output.
To return to digital sound
Press ANALOG/CMH repeatedly until ") DIGITAL" appears on the
screen.
Playing discs with a Cal (CX) logo
LDs bearing the C™ logo are recorded with the CX noise reduction
system, which gives lower noise level and higher dynamic range on
analog sound. The player detects most O&M discs and activates the CX
noise reduction system automatically when outputting analog sound. If
your CI LD does not contain a code to activate the CX noise reduction
system, you can activate the CX noise reduction system manually while
playing analog sound.
To activate the CX noise reduction system manually
Press the ANALOG/OMl button repeatedly until "CX ON" appears.
The CX noise reduction system is activated.