Emergency Stop Button - Prism Medical UK FREEWAY SA160 User Manual

8 Fit the hand control unit to the
hand control socket located on the
base of the control unit.
NOTE: The hand control lead can
only be fitted in one orientation
into its socket. Do not use force to
insert the hand control into its
socket. The plug when correctly
inserted should be pushed firmly
home.
THE STAND AID IS NOW READY FOR USE
***PLEASE READ THE OPERATING INSTRUCTIONS
CAREFULLY—see page 10 ***
2.0 STAND AID FEATURES

2.1 Emergency Stop Button

During all operations and at all times, the stop button should be in the out position.
In the unlikely event of a failure of the handset control, it is possible that the electric
ram either continues to lift or continues to lower. This may be overridden by
pressing the Emergency stop button to stop the ram. To re-set the button after it has
been pressed, simply twist it slightly clockwise and the button will spring outwards.
Emergency Stop Button
THE STAND AID WILL NOT OPERATE WITH THE STOP BUTTON PUSHED IN
SA160 User Manual Rev 5—October 2016 Page 5