Table of Contents
Advertisement
1.0 ASSEMBLY INSTRUCTIONS
Freeway SA160 Stand Aid
1.1 Initial Assembly
1. Remove carefully from the box:
Boom / Mast assembly
Base unit with legs attached (Base Unit)
Battery pack / charging lead
Hand set control
Foot Plate
Document wallet
Boom / Mast assembly
Footplate
SAFETY NOTE: Some of the parts are heavy and will need to be lifted with
care. Heavier items may need two people to lift. ( Please refer to technical
2.
Place base unit on level floor surface and lock rear castors.
3.
Remove boom/mast assembly from packaging.
4.
Carefully take the boom/mast assembly and slide bottom of the mast into the
base socket as shown in photos on page 4. When the mast is fully engaged
into the base, locate the mast locking knob and side securing
knob and tighten by hand firmly.
SA160 User Manual
details on page 15
Rev 5—October 2016
Battery Pack
Handset Control
Base Unit
Continued....
Page 3
Advertisement
Table of Contents
