Prism Medical UK FREEWAY SA160 User Manual page 4

1.0 ASSEMBLY INSTRUCTIONS
Freeway SA160 Stand Aid
4 - Cont'd
Ensure that the mast is fully down and fully engaged*
SAFETY NOTE: Possible finger trap. Keep fingers away from
end of mast when fitting to base unit
5 The control unit is already fitted to the
mast, so assembly is not required
Check the emergency stop button (red
button) located on the control box is in
the out position (i.e. out )
Emergency stop button
6 Fit the battery pack to the control box
making sure it clicks into position in the
top of the bracket, as shown.
7. Insert the jack plug for the leg spreading mechanism into the base of the control
box (Socket L2) and push the cable into the retaining clips on the mast
SA160 User Manual
.
Rev 5—October 2016 Page 4