Personal Safety; Power Tool Use And Care - Stanley NB08PT-18 Instruction Manual

E N G L I S H
• When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord suitable for
outdoor use reduces the risk of electric shock.
• If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use
of an RCD reduces the risk of electric shock.
1.4

PERSONAL SAFETY

• Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool
while you are tired or under the infl uence of drugs, alcohol or medication. A moment of inattention while operating
power tools may result in serious personal injury.
• Use personal protective equipment. Always wear eye protection. Protective equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for appropriate conditions will reduce personal injuries.
• Prevent unintentional starting. Ensure the switch is in the off -position before connecting to power source and/or
battery pack, picking up or carrying the tool.
• Carrying power tools with your fi nger on the switch or energizing power tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part
of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in
unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts.
Loose clothes, jewellery or long hair can be caught in moving parts.
• If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and
properly used. Use of dust collection can reduce dust-related hazards.
1.5

POWER TOOL USE AND CARE

• Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better
and safer at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and off . Any power tool that cannot be controlled with the
switch is dangerous and must be repaired.
• Disconnect the plug from the power source and/or the battery pack from the power tool before making any
adjustments, changing accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the
power tool accidentally.
• Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these
instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition
that may aff ect the power tool's operation. If damaged, have the power tool repaired before use. Many accidents are
caused by poorly maintained power tools.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are
easier to control.
• Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking into account the
working conditions and the work to be performed. Use of the power tool for operations diff erent from those intended could
result in a hazardous situation.
• The tool must be maintained in a safe working condition at all times and examined at regular intervals for damage and
function by trained personnel. Any dismantling procedure will be undertaken only by trained personnel. Do not dismantle this
tool without prior reference to the maintenance instructions.
• Do not modify the tool in any way. Any modifi cation to the tool is undertaken by the customer and will be the customer's entire
responsibility and void any applicable warranties.
• Disconnect the battery from the tool before performing any maintenance, attempting to adjust, fi t or remove a nose assembly.
• Prior to use, check for misalignment or binding of moving parts, breakage of parts, and any other condition that aff ects the
tool's operation. If damaged, have the tool serviced before using. Remove any adjusting key or wrench before use.
• Prior to use, inspect battery for damage. Do not drop battery. A sharp impact may cause internal damage and lead to
premature battery failure.
• Keep work area clean and well lit.
• Dress properly. Do not wear loose clothing or jewelry. Keep your hair, clothing and gloves away from moving parts. Loose
clothes, jewelry or long hair can be caught in moving parts.
• Adopt a fi rm footing or a stable position before operating the tool.
• Operators and others in work area must wear ANSI Z87.1 CAN/CSA Z94.3 or other approved safety glasses with side shields.
Always wear safety glasses and ear protection during operation.
• Adequate clearance is required for the tool operator's hands before proceeding.
• Do not operate a tool that is directed towards any person(s).
• DO NOT operate tool with the nose housing removed.
• Do not operate the tool or the charger in an explosive atmosphere or environment allowing exposure to combustible fl uids or
gasses.
4