Stanley NB08PT-18 Accessories Manual
Blind nut tool, battery power tool
Hide thumbs
Also See for NB08PT-18:
- Instruction manual (626 pages) ,
- Service manual (31 pages) ,
- Instruction manual (468 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for Stanley NB08PT-18
Summary of Contents for Stanley NB08PT-18
- Page 1 Accessories Manual NB08PT-18 Blind nut tool Battery Power Tool...
-
Page 2: Original Instruction
The information provided may not be reproduced and/or made public in any way and through any means (electronically or mechanically) without prior explicit and written permission from STANLEY Engineered Fastening. The information provided is based on the data known at the moment of the introduction of this product. - Page 3 STANLEY Engineered Fastening policy is one of continuous product development and improvement and we reserve the right to change the specification of any product without prior notice. Nose Assemblies Nose equipment varies according to the blind insert nut type being installed. Each nose assembly represents a unique set of components which can be ordered individually.
-
Page 4: Main Components List
MAIN COMPONENTS LIST Mandrel Spin Pull Head Case Nosepiece Spin Pull Head Lock Nut FR Lever Nose Housing Mast Housing Nose Housing Nut Mandrel Lock *for complete tool explosion and Bill of Material please see service manual ACCESSORIES CHANGING INSTRUCTIONS Always wear approved hearing and eye protections at all times when using installation equipment. -
Page 5: Placing Specifications
PLACING SPECIFICATIONS PLACING CAPACITY Nut Type NB08PT-18 ● ● ● ● ● ● Eurosert® ● ● ● ● ● ● Thin Sheet Nutsert® ● ● ● ● ● ● DK/DL ● ● ● ● ● ● Euro Hexsert®/Hexsert® ● ●... - Page 6 MANDREL AND NOSEPIECE WARNING: When selecting mandrel and nosepiece, always use the compatible parts. Using different parts may cause nut tightening failure or tool failure. Note: 1. Refer Table B for Thin sheet Nutsert®. 2. Refer Table C for Thin head Hexsert®. Table A Mandrel and Nosepiece compatible chart *：Option parts MANDREL NOSEPIECE...
- Page 7 Table C Thin head Hexsert® compatible chart *：Option parts NOSEPIECE MANDREL Inside Diameter Outside Diameter M8×1.0 Nut Size Part No. Part No PNT600-01-4P* φ4 TNM00151* φ4.1 PNT600-01-5P φ5 TNM00152* φ5.1 PNT600-01-6P φ6 TNM00153* φ6.1 PNT600-01-8P* φ8 TNM00150* φ8.1 MANDREL AND NOSEPIECE (OPTIONS) 1.
- Page 8 2. Pipe HB Bolt (Made to order) When fastening pipe HB bolts, install the pipe HB nose assembly. Change the mandrel attached to the tool to the socket that comes with the nose assembly. Please refer to the following list for each nose assembly component. ●SRB-630-480LF-K2-180L Nose Assembly TNM00358...
- Page 9 3. HB Bolt (Made to order) When tightening HB bolts, replace the mandrel attached to the following nosepiece and tool with the following socket to make a tool for HB bolts. HB Bolt Socket Nosepiece SPB-650R-WB***** PNT600-01-6HB-WB PNT600-02-6HB-WB SPB-625-RLT PNT600-01-6HB PNT600-02-6HB Nosepiece Socket...
- Page 10 Avdel®, Avex®, Avibulb®, Avinox®, Bulbex®, Hemlok®, Interlock®, Klamp-Tite®, Monobolt®, POP®, ProSet®, Stavex® and T-Lok® are registered trademarks of Stanley Black & Decker, Inc. and its affiliates. The names and logos of other companies mentioned herein may be trademarks of their respective owners.