Power Cord - pro.point 8656852 User Manual

V1.0
5. Do not alter any parts of the tool or accessories. All parts
and accessories are designed with built-in safety features
that may be compromised if altered.
6. Make certain the power source conforms to requirements
of your equipment (see Specifications).
7. When wiring an electrically driven device, follow all
electrical and safety codes, as well as the most recent
Canadian Electrical Code (CE) and Canadian Centre for
Occupational Health and Safety (CCOHS).
8 Grounded tools must be plugged into an outlet that is
properly installed and grounded in accordance with all
codes and ordinances. Check with a qualified electrician if
you are in doubt as to whether the outlet is properly
grounded. If the tool should electronically malfunction or
break down, grounding provides a low resistance path to
carry electricity away from the user.
8.1 Never remove the grounding prong or modify the plug
in any way, as this will render the tool unsafe.
8.2 Do not use any adapter plugs.
9. DO NOT use this device with a 2-prong wall receptacle.
9.1 Choose an available 3-prong power outlet.
9.2 Replace 2 prong outlet with a grounded 3-prong
receptacle, installed in accordance with the CE Code
and local codes and ordinances.
WARNING! All wiring should be performed by a
qualified electrician.

POWER CORD

1. Insert the power cord plug directly to the power supply
whenever possible. Use extension cords or surge protectors
only when the tool's power cord cannot reach a power
supply from the work area.
Visit www.princessauto.com for more information
10 IN. HEAVY-DUTY BENCH GRINDER 8656852
9