Assembly And Installation - pro.point 8656852 User Manual

V1.0
5.1 Position power cords away from traffic areas.
5.2 Place cords in reinforced conduits.
5.3 Place planks on either side of the power cord to
create a protective trench.
6. This grinder is equipped with a 120 volt power cord. A
qualified electrician must replace the power cord with a
230 volt, 15 amp. power cord if a 230v power source will be
used. See Assembly & Installation – Electrical Connections.
UNPACKING
WARNING! Do not operate the tool if any part is missing.
Replace the missing part before operating. Failure to do so
could result in a malfunction and personal injury.
Remove the parts and accessories from the packaging and
inspect for damage. Make sure that all items in the parts list
are included.
Contents:
• Bench Grinder
• 10 in. Grinding Wheels, 36 and 60 Grit
• Tool Rest Bracket (Left & Right), 2 pc
• Tool Rest (Left, Right) 2 pc
• Grooved Tool Rest
• Eyeshield Kit, 2 pc
• Spark Guard (Left and Right), 2 pc
• Dust Collector Hose
• Hardware
ASSEMBLY & INSTALLATION
Numbered references in parenthesis (#1) refer to the included
Parts List.
Visit www.princessauto.com for more information
10 IN. HEAVY-DUTY BENCH GRINDER 8656852
11