Operation; Grinding Wheels - pro.point 8656852 User Manual

V1.0 10 IN. HEAVY-DUTY BENCH GRINDER 8656852

OPERATION

WARNING! Inspect the grinding wheels before starting
the machine for visible defects such as fissures, cracks
or chips. The wheel may break apart and cause an injury.
Replace damaged grinding wheels immediately (See Care
& Maintenance).
CAUTION! Keep your bench grinder clean by removing dust
and grit from working parts, the lower portion of the wheel
guard assembly and the work area surrounding the grinder.
Dust and grit can damage the tool's internal mechanism.
ON/OFF SWITCH WITH KEY
The ON/OFF rocker switch with key (#39) is located on the
front of the grinder. Press the switch up to turn the power ON.
Push the switch down to turn the power OFF.
Remove the yellow key from the switch when you are finished
working with the grinder. The power switch will not work
without the yellow safety key in place. The safety key can only
be removed when the power switch is in the OFF position.

GRINDING WHEELS

For best grinding results and maintaining good balance, always
keep the wheels properly dressed.
Never force a workpiece against a cold wheel. Use light
pressure until the wheel becomes warm.
BASIC GRINDER OPERATIONS
WARNING! Never start the tool with the operator or bystander
in line with the grinding wheel. A damaged grinding wheel
could shatter and the debris may cause an injury.
WARNING! Always wear safety goggles or safety glasses with
side shields during operation of any power tool. If the
operation is dusty, wear the appropriate protective mask.
Visit www.princessauto.com for more information 15