pro.point 8656852 User Manual page 6

8656852
8. This tool will not stop moving immediately. Do not leave
the tool unattended until it has come to a complete stop.
9. Never touch the grinding wheel or workpiece during or
immediately after use. The grinding wheel or workpiece will
be too hot to be touched by bare hands.
10. Clean dust and debris from beneath the grinding
wheels frequently.
11. Do not stand directly in front of the machine when turning it
ON. Always stand off to the side of the machine and do not
allow any part of your body to be in line with the wheel's path.
12. Do not grind magnesium or aluminum, as a fire may result.
13. Make sure the bench grinder is on a firm, level surface and
properly secured to avoid injury from unexpected movement.
Firmly clamp or bolt the bench grinder to a support surface
to prevent slipping or sliding during the operation.
14. Do not use a grinding wheel that vibrates when used. If
dressing the wheel does not solve the vibration, replace it.
Also inspect the machine for other causes of vibration such
as worn bearings or a bent shaft. Repair or replace broken
components immediately before reusing the machine.
15. Adjust the distance between a worn wheel and the tool rest
to maintain a 1/8 in. or less gap.
GRINDING TOOL PRECAUTIONS
1. Only use a grinding wheel of the recommended size
with the correct bore size and shape that matches the
grinder's spindle.
2. Ensure the grinding wheel has a clean edge. Check
the grinding wheel for wear or chipping and replace
if necessary.
3. Never install more than one grinding wheel at a time
unless the tool and wheels are designed for that purpose.
6
10 IN. HEAVY-DUTY BENCH GRINDER
For technical questions call 1-800-665-8685
V1.0