Wheel Dressing - pro.point 8656852 User Manual

V1.0
replaced by an authorized technician. Only use identical
replacement parts when servicing.
2.1 Reposition the tool rest closer to the wheel face as it wears
away. The gap between the wheel face and the tool rest
should not be greater than 1/8 in. Replace the worn wheels
when the 1/8 in. maximum gap cannot be maintained.
3. Follow instructions for lubricating and changing accessories.
4. Only use accessories intended for use with this tool.
5. Maintain the tool's labels and name plates. These carry
important information. If unreadable or missing, contact
Princess Auto Ltd. for replacements.
6. Wheels should be dressed periodically to maintain grinding
efficiency, especially if they become clogged from grinding
soft metals. Use a grinding wheel dresser to restore the
wheel's original shape.
6.1 Dress the grinding wheel face only. Dressing the wheel
sides can cause it to become too thin for safe use.
7. Keep all parts in working order. Check to determine that
the guard or other parts will operate properly and perform
their intended function.
8. A guard or other part that is damaged should be properly
repaired or replaced. Do not perform makeshift repairs.
9. Disconnect tool when changing grinding wheels.
10. Replace a cracked wheel immediately and use only the
flanges supplied with the grinder.
11. Replacement wheels must have a minimum rated speed of
1,725 RPM and a maximum diameter of 10 in.

WHEEL DRESSING

A grinding wheel may become unbalanced due to irregular
wear or it is loaded with ground material. The grinding wheel
must be trued and dressed.
Visit www.princessauto.com for more information
10 IN. HEAVY-DUTY BENCH GRINDER 8656852
17