B Upgrading The Camera Software - Huawei VPT300 Installation And Commissioning Manual

VPT300 Intelligent Camera
Installation and Commissioning Guide（Single-
VPT300）
B
Step 1 Connect the VPT300, TE endpoint, and computer, and ensure that they can
communicate with each other, as shown in
Figure B-1 VPT300 connection diagram
Step 2 Log in to the web interface of the TE endpoint. For details, see
the Web Interface of an
Step 3 Choose Device Control > Device Control and click the Camera parameters
adjustment tab.
Step 4 In the VPT300 parameters adjustment area, set the camera IP address, subnet
mask, gateway address, and upgrade password, as shown in
Issue 04 (2020-02-11)
Upgrading the Camera Software
Endpoint.
Copyright © Huawei Technologies Co., Ltd.

B Upgrading the Camera Software

Figure B-1.
3 Logging In to
Figure B-2.
35