Table of Contents
Advertisement
VPT300 Intelligent Camera
Installation and Commissioning Guide（Single-
VPT300）
Figure B-2 Adjusting VPT300 parameters
Table B-1 VPT300 parameter description
Parameter
Connection type
Issue 04 (2020-02-11)
Description
IP address obtaining
mode of the VPT300.
● Static IP: The IP
address of the camera
is allocated by the
network
administrator. You
need to set Camera
IP, Subnet mask, and
Gateway address.
● Dynamic IP: The
endpoint
automatically obtains
an IP address using
the Dynamic Host
Configuration
Protocol (DHCP). If
you select this option,
a DHCP server must
be available on the
network.
Copyright © Huawei Technologies Co., Ltd.
B Upgrading the Camera Software
Setting
Set this parameter based
on the site requirements.
The default value is
Static IP.
36
Advertisement
Table of Contents
