Table of Contents
Advertisement
VPT300 Intelligent Camera
Installation and Commissioning Guide（Single-
VPT300）
Parameter
Camera IP
Subnet mask
Gateway address
Password for upgrades
Step 5 Choose Maintenance > Diagnostics. In the Network Test area, enter the IP
address of the VPT300 and click Start, as shown in
endpoint can communicate with the VPT300.
Issue 04 (2020-02-11)
Description
IP address of the
VPT300.
Subnet mask of the
VPT300.
Gateway address of the
VPT300.
Upgrade password of the
VPT300.
Copyright © Huawei Technologies Co., Ltd.
B Upgrading the Camera Software
Setting
Set this parameter based
on the site requirements.
The default value is
192.168.1.1.
NOTE
The VPT300 IP address
must be an IPv4 address.
Set this parameter based
on the site requirements.
The default value is
255.255.255.0.
Set this parameter based
on the site requirements.
This parameter has no
default value.
Set the password as
preferred. The default
upgrade password of the
VPT300 is Change_Me.
The password contains 8
to 32 characters. It must
contain at least two
types of the following:
uppercase letters,
lowercase letters, digits,
and special characters.
Figure
B-3, to test that the TE
37
Advertisement
Table of Contents
