Table of Contents
Advertisement
VPT300 Intelligent Camera
Installation and Commissioning Guide（Single-
VPT300）
Figure 3-2 Web login page
Step 3 Enter the user name admin and password (Change_Me by default), and click Log
In.
----End
Issue 04 (2020-02-11)
● If you forget the login password, press and hold the RESET button on the TE endpoint
for 10s when the TE endpoint is running to factory reset it. After the factory reset, all
the settings are restored to the default settings.
● If you log in to the web interface for the first time, follow the on-screen instructions to
change the password immediately. Then change the password periodically and keep it
secure.
● If Web login under Advanced > Settings > Security > Web Login on the TE endpoint's
user interface is set to Disable, the endpoint's web interface is inaccessible. If Web
login is set to Wi-Fi only, you can access the endpoint's web interface only from the
computer that connects to the Wi-Fi hotspot on the endpoint.
Copyright © Huawei Technologies Co., Ltd.
3 Logging In to the Web Interface of an Endpoint
20
Advertisement
Table of Contents
