VPT300 Intelligent Camera
Installation and Commissioning Guide(Single-
VPT300)
After the installation is complete, check the following to ensure the camera's
tracking performance:
●
●
●
Issue 04 (2020-02-11)
2
Ensure that the bottom of the VPT300 base is 1.5 m to 1.7 m (4.9 ft to 5.6 ft)
above the ground.
Remove the protective film (as shown in
dual-camera system.
Figure 2-1 Lens protective film of the dual-camera system
When mounting the VPT300 on a flat surface such as a table, align the front
edge of the VPT300 with the table edge (as shown in
the lens of the dual-camera system from being blocked.
Copyright © Huawei Technologies Co., Ltd.
Verifying the Installation
Figure
2 Verifying the Installation
2-1) from the lens of the
Figure
2-2) to prevent
17