VPT300 Intelligent Camera
Installation and Commissioning Guide(Single-
VPT300)
Figure A-5 Calibration calculation
● The calibration calculation takes a maximum of 3 minutes. Wait for the
calibration result.
● If the calibration fails, a red box blinks. In this case, perform the preceding steps
again.
Step 10 Run the mnt reboot command or press the power switch at the rear of the
VPT300 to restart the VPT300 for the calibration to take effect.
the position of the power switch.
Issue 04 (2020-02-11)
NO TICE
Copyright © Huawei Technologies Co., Ltd.
A Calibrating the Camera
Figure A-6
shows
33