Enabling Vpt300 Tracking In Idle State - Huawei VPT300 Installation And Commissioning Manual

VPT300 Intelligent Camera
Installation and Commissioning Guide（Single-
VPT300）
6

Enabling VPT300 Tracking in Idle State

Step 1 Choose System Settings > Input/Output > Video Input. The Video Input page is
displayed.
Step 2 In the Common Camera Settings area, set Enable VPT300 tracking when idle to
Yes, as shown in
Figure 6-1 Enabling VPT300 tracking
Issue 04 (2020-02-11)
Figure 6-1.
● If Enable VPT300 tracking when idle is not available on the web interface of the TE
endpoint, use commands to enable VPT300 tracking. For details, see
Commands to Enable VPT300 Tracking in Idle
● If users want to disable VPT300 tracking when there is no conference, set Enable
VPT300 tracking when idle to No after the camera tracking test is complete.
Copyright © Huawei Technologies Co., Ltd.
6 Enabling VPT300 Tracking in Idle State
State.
C Using
24