Related Manuals for Rogers Coach's Command Tower
Summary of Contents for Rogers Coach's Command Tower
- Page 1 PRODUCT INFORMATION PACKET PRODUCT NAME: Coach's Command Tower Part Number: 360168...
-
Page 2: Table Of Contents
Coach's Command Tower and its functions and maintenance. If your manual becomes lost or destroyed, Rogers Athletic will gladly provide you with a new copy. Should you require additional information or assistance, please feel free to contact us at 1-800-438-4499. -
Page 3: General Safety Rules
Do not haul Coach's Command Tower at speeds exceeding 5 mph. Hauling at excessive speed may cause the tower to lose control, causing an accident or serious injury. The Coach's Command Tower is for Off Road use only. The tower is intended to be used at practice/game fields. -
Page 4: Symbols
Symbols Safety Alert: Precautions that involve your safety Read The Operator’s Manual: To reduce risk of injury, user must read and understand operator’s manual before using this product Pinch Point Warning Label: Failure to keep hands away from pinch points will result in personal injury For Off-Road Use Only Warning Label: Field equipment is not intended or designated for roadway travel. -
Page 5: Technical Specifications
Rogers Athletic Field Equipment Rogers Athletic Field Equipment Specifications Specifications Rogers Athletic Rogers Athletic Field Equipment Field Equipment Specifications Specifications Coach's Command Tower Weight: 537 lbs Dim A: 8 ft Dim B: 4 ft Dim C: 42 in Dim D: 6 ft 4’x 8’... -
Page 6: Assembly Instructions
Assembly Instructions Note: Assembly will require at least two people. Lay out the understructure as shown. Having parts in approximate layout will be a great help during assembly. With the casters locked, raise the H-Sections. While holding the H-section upright, place the two shorter connector bars on the lower horizontal tube as shown. - Page 7 Next, attach longer connector bars to a lower, and an upper horizontal tube as shown. Make sure all frame locks are locked. 2’ Place the shortest connector between the two horizontal connectors, 2 ft. from one end.
- Page 8 Place deck onto conical nodes. Assure the deck is fully placed on all four nodes. Place rails on deck, to secure rails, turn handles clockwise. Make sure someone is holding the rail until BOTH handles are tightened, and rail is fully secured to the deck. Repeat until all 6 rails are secured.
- Page 9 Place stair assembly on the top horizontal tube of the h-section containing the 2’ rail. Make sure the Frame Locks are fully secured. Stow the stairs by clipping them to the short crossbar on the base of the tower frame. To release frame locks for stowing stairs or disassembly, push the finger of the lock upward and lift the lock off the tube.
- Page 10 Engage Disengage CASTER BRAKES MUST BE ENGAGED BEFORE STANDING ON THE Coach's Command Tower! CLIP THE SAFETY CHAIN WHILE THE Coach's Command Tower IS IN USE. BUT BE SURE CHAIN IS DISENGAGED WHEN DISASSEMBLING THE TOWER.
-
Page 11: Maintenance
Customer Service For parts or service contact Rogers Athletic Company. When ordering parts be sure to provide all relevant information available including the name and part number of the equipment purchased. This information is located on the cover of this product information package. - Page 12 Rogers Athletic Company 3760 N. Ludington Drive Farwell, MI 48622 www.rogersathletic.com (989) 386-2950 (800) 248-0270 Fax toll free (888) 549-9659...
Need help?
Do you have a question about the Coach's Command Tower and is the answer not in the manual?
Questions and answers