Related Manuals for Rogers Stadium Pro 2000
Summary of Contents for Rogers Stadium Pro 2000
- Page 1 Product Information Packet Product Name: Stadium Pro 2000 Goal Post Product Part Numbers: 410181, 410182, 410185...
-
Page 2: Table Of Contents
If your manual becomes lost or destroyed, Rogers Athletic will gladly provide you with a new copy. Should you require additional information or assistance, please feel free to contact us. -
Page 3: General Safety Rules
General Safety Rules WARNING! READ AND UNDERSTAND ALL INSTRUCTIONS. Failure to follow all instructions listed below may result in serious personal injury. SAVE THESE INSTRUCTIONS Use field equipment in a supervised environment with proper gear. Inspect equipment prior to use. DO NOT use if it appears damaged or inoperable. NOTE: to avoid damage to equipment, disassemble the Goal Post if winds of over 60mph are expected. -
Page 4: Symbols
Symbols Safety Alert: Precautions that involve your safety. Do Not Climb Symbol: Climbing on or playing around equipment may result in personal injury. Read the Operator’s Manual: To reduce risk of injury, user must read and understand operator’s manual before using this product. -
Page 5: Technical Specifications
Can come with High-School crossbar (23’4”) or Collage/Pro crossbar (18’6”). Comes in White or Optic Yellow. Stadium Pro 2000 Goal Post Construction, Finish, and Hardware - Constructed of schedule 40 aluminum pipe. - Baked-on powder coat finish. - Zinc-plated hardware. -
Page 6: User Instructions
Locate the center point of the playing field and mark the center point of the goal post 6'-0" back from the end line. Dig a hole 36” diameter by 6’3” deep, leveling and packing the bottom as much as possible. Add 4"... - Page 7 After the first pour has set, insert the base sleeve. Be careful to center and align it before bracing it for the second pour. Do not allow concrete to enter the base sleeve. The second pour should stop at 7.5" below ground level.
- Page 8 Slide the connector centered on the crossbar into the mouth of the main standards "gooseneck". Be sure that the stub ends at either end are pointing upward. Do not put the bolts in at this point. Rotate the crossbar until one end is accessible (not illustrated). Set the upright over the stub end and insert the bolts with washers on both sides of the uprights and set the nuts as shown.
-
Page 9: Maintenance
Customer Service For parts or service contact Rogers Athletic Company. When ordering parts be sure to provide all relevant information available including the name and part number of the equipment purchased. This information is located on the cover of this product information package. - Page 10 Rogers Athletic Company 3760 N. Ludington Drive Farwell, MI 48622 www.rogersathletic.com (989) 386-2950 (800) 248-0270 Fax toll free (888) 549-9659 PIP410181...
Need help?
Do you have a question about the Stadium Pro 2000 and is the answer not in the manual?
Questions and answers